CRM Mitchell1, Author at Castro Valley Union 76

2007 Jeep Liberty
Mileage
172,524
Service Date
7/22/2024
Services Performed
Vehicle needs Front both side upper and lower controls arms, both outer tie rod ends, also sway bar link kits, both rear shock, both rear upper control arm, wheel alignment. CUSTOMER DECLINED THE REPAIR WILL TALE IT AS IS.
JOHN W. gave our service a 5 star review on 7/23/2024
2014 Toyota Prius
Mileage
87,850
Service Date
6/25/2024
Services Performed
Haz disposal fee
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
DANIEL M. gave our service a 5 star review on 7/12/2024
2018 Honda CR-V
Mileage
106,583
Service Date
7/11/2024
Services Performed
Haz disposal fee
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
BRIAN M. gave our service a 5 star review on 7/11/2024
2010 Ford Fusion
Mileage
147,357
Service Date
7/10/2024
Services Performed
Smog inspection and certificate if pass
ROBERT W. gave our service a 5 star review on 7/10/2024
2015 Toyota Corolla
Mileage
72,074
Service Date
7/2/2024
Services Performed
Inspect brake pads/shoes all four wheels, inspect calipers or wheel cylinder, inspect hydraulic parts, test drive the car, issue certificate if passes BA 4227147
Inspect all lights for illumination and align the head lights with optical aimer for salvaged car, issue certificate if passes. LA 4174897 Airbag light is ON.
FRANCISCO D. gave our service a 5 star review on 7/3/2024
2012 GMC Acadia
Mileage
129,238
Service Date
6/29/2024
Services Performed
Found code B0413 for temp sensor control circuit 1 and code B0423 for temp sensor control circuit 2. Found driver side and passenger side temp door to be stuck on hot, doors would not move position when commanding to cold. Also noticed at high speed fan was not strong at face level when selected by mode door. Recommend remove and replace driver and passenger side temp door actuator, mode door actuator, cabin air filter due to being dirty, calibrate actuators and test system. System working as designed at this time.
HVAC DOOR ACTUATOR – Remove & Replace – Automatic Temperature Control,Main Unit,Front,Temperature Door,Left Side
HVAC DOOR ACTUATOR – Remove & Replace – Automatic Temperature Control,Main Unit,Front,Temperature Door,Right Side – [ Includes: R&I Glove Box.]
HVAC DOOR ACTUATOR – Remove & Replace – Automatic Temperature Control,Main Unit,Front,Mode Door
ROSIE S. gave our service a 5 star review on 7/3/2024
2010 Dodge Caliber
Mileage
134,883
Service Date
6/20/2024
Services Performed
Smog inspection and certificate if pass DMV ID NUMBER: 2345Y622T884
DIANNE W. gave our service a 5 star review on 7/3/2024
2008 Infiniti G37
Mileage
134,826
Service Date
6/29/2024
Services Performed
Includes installation front brake pads Clean and lubricate caliper slide mechanisms.
Turn front disc rotors
EARTHA W. gave our service a 5 star review on 6/30/2024
2020 Ford Ranger
Mileage
28,469
Service Date
6/28/2024
Services Performed
Found code U3000:42-68, U3000:44-68, U3000:49-AF, and U3000:64-68 in image processing module for control module fault. Found image processing module behind rear view mirror to be bad. Recommend remove and replace image processing module, program module to vehicle using ford AS BUILT data, calibrate the vehicle using Forscan procedure.
IMAGE PROCESSING MODULE – Remove & Replace – Image Processing Module-A (IPMA)
Enter all data for ports 706-01-01 to ports 706-03-06 in image processing module to configure to vehicle. Measure distance on front wheels from bottom of front tires to wheel arch, enter in module. Road test vehicle with FORSCAN hooked up to calibrate image camera. Clear codes after calibration, lane camera departure back to functioning.
MIKE S. gave our service a 5 star review on 6/28/2024
2013 Ford Mustang
Mileage
55,466
Service Date
6/27/2024
Services Performed
Haz disposal fee
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
TOM F. gave our service a 5 star review on 6/27/2024

CRM Mitchell1

We Service and Repair all CRM Mitchell1 cars