Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
CARL L. gave our service a 5 star review on 2/17/2024
Found no power to starter. Found code P0706 for transmission range sensor rationality. Hook up scanner and found vehicle to always saying its in neutral even when vehicle is physically in park. Recommend remove and replace transmission range sensor (neutral safety switch), clear check engine light and road test the vehicle.
NEUTRAL SAFETY SWITCH – Remove & Replace – 6 Spd Trans Range Sensor – [Includes: R&I Valve Body Assembly.]
MARIA A. gave our service a 5 star review on 2/10/2024
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
HEADLAMP BULB – Remove & Replace – Right Front
KATHY W. gave our service a 5 star review on 2/3/2024
Found code P0C2A:00 for auxiliary transmission fluid pump "A" motor stalled, code P0123:00 for cylinder head temp 2 circuit high, code P1285:00 for cylinder head overtemp condition, code P1299:00 for cylinder head overtemp protection active. Found engine temperature at 70 degrees on start up, but temp gauge full hot and vehicle fan on. Recommend remove and replace cylinder head temp sensor, temp gauge now reading correct and vehicle fan comes off and on at correct time. Found auxiliary transmission pump to be bad causing vehicle to not go above 30 mph. Recommend remove and replace auxiliary transmission pump, clear computer memory and road test the vehicle.
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
Balance and rotate all four tires
Remove and reinstall four wheels and rear brake drums to inspect brake condition. Inspect entire system for leaks. Lining remaining is: Front ( 15 %) Rear (40 %)
Replace front brake pad linings. Clean and lubricate brake calipers and slide mechanisms. Check and fill brake fluid. . Road test vehicle.
Replace right front and left rear tire pressure sensors and program to vehicle
SPARK PLUGS AND WIRE SET – Remove & Replace – V6
FUEL FILTER – Remove & Replace
DIANA S. gave our service a 5 star review on 1/24/2024
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
ROBERT S. gave our service a 5 star review on 1/19/2024
Inspect brake pads/shoes all four wheels, inspect calipers or wheel cylinder, inspect hydraulic parts, test drive the car, issue certificate if passes CERT# BA 4120228 QLB
Inspect all lights for illumination and align the head lights with optical aimer for salvaged car, issue certificate if passes. CERT# LA 4065828 QLB
VASILIY Z. gave our service a 5 star review on 1/13/2024