2006 Honda Pilot
Mileage
248,166
Service Date
8/19/2022
Services Performed
- Found code P2647 for variable cylinder management stuck on, code P0137 for oxygen sensor bank 1 sensor 2 low voltage, code P0300 for random misfire, code P0301 for cylinder 1 misfire, P0302 for cylinder 2 misfire, code P0303 for cylinder 3 misfire, code P0304 for cylinder 4 misfire, code P0305 for cylinder 5 misfire, and code P0306 for cylinder 6 misfire. Remove oil sending unit to check oil pressure, oil pressure is 25 psi at hot idle and 60 psi at 2500 rpm. Found camshaft adjuster solenoid (variable valve timing solenoid) to be bad. Recommend remove and replace solenoid, change engine oil, clear check engine light and road test.
- Haz disposal fee
- Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
- OIL PRESSURE SENDER OR SWITCH – Remove & Replace
- VARIABLE VALVE TIMING OIL CONTROL VALVE SOLENOID – Remove & Replace
KATHERINE S. gave our service a 5 star review on 8/19/2022
